Home > Amateur Radio > Ham-Comm 3.0

Ham-Comm

3.0

Requires: 512K RAM, Hard Disk, DOS 3.0+, Any monitor.

Amateur Radio order form

Description	Regular price		Student discount
SEND, RECEIVE AND DECODE RTTY AND MORSE SIGNALS WITHOUT a TNC. Modes: BAUDOT, ASCII, AMTOR ARQ/FEC, SITOR A/B and NAVTEX. Decodes SHIP & SYNOP Weather reports. MODEM & TNC NOT REQUIRED. Connect receiver audio to serial port through a very simple low-cost circuit (diagrams included in manual on disk). Only one IC is needed (Op-amp LM741 or similar) and a few diodes, capacitors and resitors. For transmission: serial port is connected to the microphone input of the transmitter thru a passive R/C filter. Audio frequency generation and decoding, serial/parallel conversion and all other signal processing is done by the program!	Price: $4.71		Price: $3.77
	Quantity:		Quantity: Name of your school:

© 1994 American Systems & Software

Contact: custsvcebooks.n7nz.org

Web page problems?
Contact: webfootsterebooks.n7nz.org